The Hollywood Racks Destination bike rack part # HLY66ZR has enough rise in the shank that it wouldn't drag when going up and down hills with your Lexus. view full answer...
I recommend the Class III hitch because it is allows for a greater range of accessories. The difference between class III and class II hitches is the 2 inch opening compared to the 1-1/4 inch receiver tube opening. There are far more accessories and bike racks that fit a 2 inch hitch than the smaller 1-1/4 inch and because the shank inserted in the receiver is larger they are more stable and can support more weight.
The Class I hitches are basically a class II hitch with a shorter... view full answer...
All three of the Inno roof racks will work well on your 2015 Lexus.
The difference between the roof racks are the crossbars and feet. Our least expensive roof rack features square crossbars, while the other two roof racks have aerodynamic bars. All three roof racks have the same weight capacity at 140 lbs.
Since aerodynamic crossbars will mean less wind noise and drag I recommend the NX 300h roof rack. To order this roof rack you will need part # INXB138-145, part # INXS250, and part... view full answer...
We have the parts needed to install a 7-way and brake controller on your 2021 Lexus NX300h. You would first need to start with a 4-way if you don't have one already. For that you would want the Tekonsha kit part # 118652 and then convert it to a 7-way with the # ETBC7 so that you can install a brake controller like the P3 part # 90195.
The ETBC7 is a universal 7-way kit so it would not need to be listed as a fit for your vehicle for us to know it will work. view full answer...
Both of the Curt hitches you mentioned are a confirmed fit for your 2017 Lexus NX 300h the part # C13337 which is a Class III hitch and has a 2 inch opening and the part # C12172 which has a 1-1/4 inch opening. Whenever available I recommend going with the 2 inch hitch option as it has better weight capacities and more accessories like bike racks made for it. view full answer...
The HighNoon # RKY87RR can be used with your ebike as it has the 60 lb weight capacity needed and can fit fat tires.
Then for a hitch to use with this rack that fits your 2019 Lexus NX 300h you'd want the part # C12172 and you'd be set. view full answer...
S-Class tire chains for passenger vehicles with tire size 225/60R18 appear on the linked page. These special low-profile chains are made for the many passenger vehicles that have limited clearance within their wheel wells.
In terms of ease of installation the very best option is Konig K-Summit chain set # TH02230K66. These European made chains offer automatic tension control (so no rubber cords are needed to hold them securely), protection for the vehicle's rims and steel D-shaped links... view full answer...
For your 2018 Lexus NX 300h I recommend the Curt Trailer Hitch Receiver # C13337 class 3 hitch. This hitch will allow you to be able to carry more accessories and handle the weight better when loading 4 bikes. The only 4 bike racks that use a 1-1/4" receiver are hanging racks.
The 2" receiver is what you will need for your Kuat NV 2.0 Bike Rack # NV22G (Gunmetal Gray), # BA22B (Matte Black), or # NV22B (Metallic Black). The 2" racks are the only racks that are able to accommodate the... view full answer...
For your 2018 Lexus NX 300h the Curt hitch part # C13337 is a fit and it also fit the 2017 models as well. I attached an install video for the hitch for you to check out as well. view full answer...
I do have a roof rack that will fit your vehicle, unfortunately it will not include the Rhino-Rack legs you attached to your question. I checked with Rhino Rack today and I was told that this rack is not a fit for your vehicle. Instead, I recommend a Yakima roof rack. It comes with the crossbars, the towers/feet/legs, and a fit kit that is vehicle specific.
I recommend the Yakima option, it consists of the following;
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2,... view full answer...
For your application we'll need to look at a different bike rack. From what I was seeing the rear fender on your GoEagle Gopowerbikes cover the entire wheel so the Saris SuperClamp HD # SAR44VR won't work.
Instead I recommend checking out either the Hollywood Racks Sport Rider SE # HLY84FR or the Destination E Bike Rack # HLY66ZR which both have higher weight ratings (80 lbs and 70 lbs respectively - you'll still want to remove the battery) and they secure the bikes by the frame instead... view full answer...
The Kuat Transfer V2 Bike Platform Rack # KU74FR does have adjustable positioning for all the wheel trays. You are not able to adjust the distance from your vehicle or the distance between the bikes. The wheel trays simply adjust in or out to better fit the wheel base. The distances away from the vehicle when folding for storage will stay at the 6 inches from the center of the hitch pin as will the closest part of the carrier.
It is recommended to put the heaviest bike closest to... view full answer...
Go To Results